The TECH PAC MC WHEELER BLACKOUT is a medium-sized rolling tool backpack with an all-black color scheme inspired by the TECH PAC MC BLACKOUT. This wheeled backpack includes new premium padded backpack straps that are completely removable, making the backpack straps easier to stow and decide whether or not to carry as a backpack. The TECH PAC MC WHEELER BLACKOUT also features our proprietary V-SWAP™ system of interchangeable panels. Includes the Tool Panel (included and mandatory) and Meter Panel. Other panels sold separately as shown below.
PRODUCT SPECIFICATIONS:
Height (H): 18.5" (47 cm)
Width (W): 14" (36 cm)
Depth (D): 10.5" (27 cm)
Weight (empty): 15 lbs / 6.8 kg
Internal Volume: 1640 in³ / 27 L
Max Payload: 50 lbs / 23 kg
MAXIMIZED TOOL STORAGE CAPACITY:
- 35 interior and exterior tool pockets
- All black color scheme
- Premium removable backpack straps with extra padding and enhanced materials for increased durability and load capacity
- Storage compartment for backpack straps when removed
- External Velcro loop for attaching patches
- Quick release metal hasp supports load & allows easy access to rear storage bay
- V-SWAP™ removable tool pocket panel system with alternate tool panels available & sold separately
- Waterproof polypropylene plastic base with integral wheels and trolley system
- Thermoformed cushioned EVA back pad
- Metal YKK® locking zippers
- 8” electrical tape strap
- Interior gray pockets for better visibility
- Magnetic screw catcher
- 5 year limited warranty
Additional Information
VETO PRO PAC TOOL BAGS PRODUCT CARE AND MAINTENANCE
-
Keep the Zippers Clean & Lubricated: Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: scrub them with soapy water; a toothbrush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: apply a silicone spray, beeswax, or a zipper lubricant.
-
Protect the Zippers From Sharp Objects and/or Excessive Heat: Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
-
Don’t Overstuff the Bag: Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!
